24kV 630A T Cable Connector provides a fully screened and fully submersible connection when mated with the proper bushing or plug. For connection of polymeric cable to transformers, switch gear, motors, and other equipment with a premoulded separable connector. Optional capacitance test point allows for an easy check of the circuit status or installation of a fault indicator. These 24kV 630A T Cable Connector are made by EPDM with the good quality.
| Reference No. | Conductor Cross Section(mm²) | stretch range over insulation(mm) |
|---|---|---|
| DSC12/630-25 | 25 | 16.6 |
| DSC-12/630-35 | 35 | 17.6 |
| DSC-12/630-50 | 50 | 19 |
| DSC-12/630-70 | 70 | 20.6 |
| DSC-12/630-120 | 120 | 23.6 |
| DSC-12/630-150 | 150 | 25.2 |
| DSC-12/630-185 | 185 | 26.7 |
| DSC-12/630-240 | 240 | 29 |
| DSC -12/630-300 | 300 | 31.2 |
| DSC -12/630-400 | 400 | 34.4 |
| DSC -12/630-500 | 500 | 37.2 |
| Reference No. | Conductor Cross Section(mm²) | stretch range over insulation(mm) |
| DSC -24/630-35 | 35 | 18.6 |
| DSC -24/630-50 | 50 | 19.6 |
| DSC -24/630-70 | 70 | 21 |
| DSC -24/630-95 | 95 | 22.6 |
| DSC -24/630-120 | 120 | 24.2 |
| DSC -24/630-150 | 150 | 25.6 |
| DSC -24/630-185 | 185 | 27.2 |
| DSC -24/630-240 | 240 | 28.7 |
| DSC -24/630-300 | 300 | 31.2 |
| DSC -24/630-400 | 400 | 33.2 |
| Voltage Class | 11kV | 24kV | 36kV |
|---|---|---|---|
| Continuous Current | 630A | 630A | 630A/ 1250A |
| Alliance Bushing | EN 50180 & 50181 Type C | EN 50180 & 50181 Type C | EN 50180 & 50181 Type C |
| AC Withstand Voltage | 29 kV for 5 min | 57.2 kV for 5 min | 85.5 kV for 5 min |
| Impulse Withstand Voltage (10 times for each polarity) | 95kV | 125kV | 175kV |
| Partial Discharge at 1.73U0 | ≤ 10pC | ≤ 10pC | ≤ 10pC |
| Screen Resistance | ≤5000 Ω | ≤5000 Ω | ≤5000 Ω |
